All About Our Electric Elements

MANUAL (STANDARD) ELECTRIC ELEMENT

Electric Radiator Heating Element Standard Heating Element

FUNCTIONALITY The Manual Electric Element is a basic, simple heating element. The Manual Electric Element has built-in protection against overheating and is fitted with a bimetal temperature limiter. The device is available in a wide range of power outputs.

INTELLIGENT BUILDING SYSTEMS The Manual Electric Element is suitable for connection to external timers and intelligent building systems.

SAFETY The Manual Electric Element has an exceptionally high degree of moisture ingress protection and is fitted with a thermal fuse to prevent overheating of the radiator.

DESIGN The Manual Electric Element has a stainless steel housing. It does not have an on/off switch on its housing so it must be controlled externally either by a timer or switched fused spur. A version with a switch located on the plug is available.

COLOUR Available colour: stainless steel.


TECHNICAL SPECIFICATIONS

Power:
230 V AC
Available output power:
150, 200, 250, 300, 400, 500, 600, 700W
Protection devices:
Class I
Radiator connection:
1/2”
Ingress protection [IP]:
IP67
Cable 1.5m

AF THERMOSTATIC ELEMENT

FUNCTIONALITY The heater with electronic thermostat type AF is a device used for heating the systems such as radiators in bathrooms, towel dryers, or as additional element for already existing systems of radiator-heating. It can also be used with other heating elements and devices. 

SAFETY

Completely protected from eventual over-heating by thermic safety fuse.

FEATURES

  • Possibility of fine temperature regulation
  • ON/OFF Button + Timer mode 2h/4h/6h/8h
  • Digital Display
  • Child-Lock (activated by pressing up and down together)
  • Completely protected from eventual over-heating by a thermic safety fuse
  • 1.2mt Flex Cable Attached

COLOUR Available colours: White, Black, Chrome, Gold, Athracite Gray


TECHNICAL SPECIFICATIONS

Power:
230 V ~ 50Hz
Available output power:
150, 200, 300, 400, 600, 800 W
Protection devices:
Class I
Radiator connection:
1/2”
Ingress protection [IP]:
IP44
Cable 1.2m

GT THERMOSTATIC ELEMENT


FUNCTIONALITY The heater with electronic thermostat type GT is a device used for heating the systems such as radiators in bathrooms, towel dryers, or as additional element for already existing systems of radiator-heating. It can also be used with other heating elements and devices.

SAFETY

Completely protected from eventual over-heating by thermic safety fuse.

FEATURES

    1. Made of high-quality components,
    2. Possibility of fine temperature regulation,
    3. Easy positioning of temperature regulation button within the field of vision,
    4. Indicator lamp can be seen from all the angles,
    5. Safety junction between the radiator and the device

COLOUR Available colours: White, Black, Chrome.


TECHNICAL SPECIFICATIONS

Power:
230 V ~ 50Hz
Available output power:
150, 300, 600, 900 W
Protection devices:
Class I
Radiator connection:
1/2”
Ingress protection [IP]:
IP67
Cable 1.8m

MOA THERMOSTATIC ELEMENT

Endearing simplicity
Our MOA heating element unit has been designed with special attention to detail. It has a minimalistic design and is available in many colours while being highly functional and ready to use. MOA's 2-hour timer gives you the comfort of not having to worry about turning off the controller. Large, user-friendly buttons as well as current and set temperature indication system, make MOA's use even easier and more intuitive. The device has a short circuit and double over heating protection. MOA's Antifreeze function protects the heating medium temperature from dropping below 5-7°C.
MOA is the I class heating element.

FUNCTIONALITY
The MOA offers 5 temperature settings ranging from 30°C to 60°C. It is equipped with an electronic temperature sensor that guarantees precise temperature control. The MOA displays the currently set temperature level and the status of the heating cycle using an LED indicator. The heating element has a very low power consumption in a standby mode.

DRYER FUNCTION This function allows the setting of a higher heating power for two hours, after which the device returns to the previous state.

INTELLIGENT BUILDING SYSTEMS In the event of a power failure the MOA remembers its previous settings therefore making it suitable for connection to external timers and intelligent building systems.

SAFETY The MOA is equipped with ‘frost’ protection (ANTIFREEZE). It also has a double protection against overheating of the radiator and displays a warning in case of malfunction It has an active safety feature in case of operation in a dry radiator.

DESIGN The MOA is supplied with a straight cable without a plug, it is also available with a cable-masking cover as an optional extra.

COLOUR Available colours: chrome and black.


TECHNICAL SPECIFICATIONS

Power:
230V/50Hz
Available output power:
120, 200, 300, 400, 600, 800W
Protection devices:
Class I
Radiator connection:
1/2”
Ingress protection [IP]:
IPx5
Cable 1.5m


FUNCTIONS OF MOA:

KTX 3 TIMER & THERMOSTATIC ELEMENT

Time & heating temperature management
KTX 3 is a perfection amongst heating element controllers with a timer that offers you the ability to program a number of time zones during a 24-hour day. Its aesthetics meets the latest designer trends, while a very well-knit construction makes it exceptionally functional and user-friendly. KTX 3 has a multi-step medium heating temperature regulation as well as an Anti-Freeze function that protects the heating medium from freezing.


FUNCTIONALITY
 The KTX 3 offers adjustable temperature levels ranging from 30°C to 60°C in steps of 1°C. An electronic temperature sensor guarantees precise temperature control. The device displays the current set temperature level and indicates the status of the heating cycle or standby state. It also has an easy interface for controller programming. The KTX 3 is designed for use with the TS 1 heating element. The unique feature of the KTX range of heating elements is the Terma‑Split System. The Terma‑Split connector makes it possible to disconnect the TS 1 from the controller head.

DAILY TIMER A 24-hour timer allows you to program up to 4 intervals for heating at a preselected temperature or to switch between heating and power off states.

DRYER FUNCTION A function that allows a controlled temperature and drying time, after which the heater will return back to its previous state.

INTELLIGENT BUILDING SYSTEMS In the event of a power failure, the heating element remembers the previous setting (last setting used), which is useful when the device is controlled by external timers and intelligent building systems.

SAFETY The KTX 3 is equipped with a ‘frost’ protection (ANTIFREEZE). It also has double protection against the heating element overheating. A device error or malfunction is identified by a display of error codes. The KTX 3 also has an additional safety feature that prevents it from working in a dry radiator.

DESIGN Equipped with an easy to read LCD display with a clock,  additional power on/off switch and screw connection.

COLOUR Available colours: white, chrome and black.


TECHNICAL SPECIFICATIONS

Power: 230V/50Hz
Available output power:
120, 200, 300, 400, 600, 800W
Protection devices: Class I
Radiator connection:1/2”
Ingress protection [IP]:
IPx4: MS version; IPx5: cable version
Cable 1.5m


FUNCTIONS OF KTX3: