Standard Electric Radiator Heating Element For Towel Rail Radiator

 Non Thermostatic Elements allow a compatible towel rail or radiator to be easily converted into an electric unit.

 (Note: The towel rail or radiator must be filled with solution before the element is turned on.

 The element must be installed vertically.) Once installed the element should be hard wired into a fused spur by a qualified electrician

Technical Specification For Non Thermostatic Elements
RATED VOLTAGE:	AC 230 – 240 Volts
Base Material:	Stainless Steel (Probe) Plastic (Cap)
IP Rating:	IP55
Length of Cable (M):	1.0 Metres
Voltage:	230AC
150W Element Size	304mm including Thread
250W Element Size	350mm including Thread
300W Element Size	410mm including Thread
400W Element Size	495mm including Thread
500W Element Size	580mm including Thread
600W Element Size	650mm including Thread
700W Element Size	750mm including Thread
Guarantee:	2 Years

The electric elements operate at a fixed temperature of 70 degrees.

Please make sure you match your radiator or towel rail to the correct wattage element.

 If you are unsure please contact us and one of our sales team will be able to advise