More About Electric Elements
MANUAL (STANDARD) ELECTRIC ELEMENT
FUNCTIONALITY The Manual Electric Element is a basic, simple heating element. The Manual Electric Element has built-in protection against overheating and is fitted with a bimetal temperature limiter. The device is available in a wide range of power outputs.
INTELLIGENT BUILDING SYSTEMS The Manual Electric Element is suitable for connection to external timers and intelligent building systems.
SAFETY The Manual Electric Element has an exceptionally high degree of moisture ingress protection and is fitted with a thermal fuse to prevent overheating of the radiator.
DESIGN The Manual Electric Element has a stainless steel housing. It does not have an on/off switch on its housing so it must be controlled externally either by a timer or switched fused spur. A version with a switch located on the plug is available.
COLOUR Available colour: stainless steel.
TECHNICAL SPECIFICATIONS
---------------------------------
GT THERMOSTATIC ELEMENT
FUNCTIONALITY The heater with electronic thermostat type GT is a device used for heating the systems such as radiators in bathrooms, towel dryers, or as additional element for already existing systems of radiator-heating. It can also be used with other heating elements and devices.
SAFETY
Completely protected from eventual over-heating by thermic safety fuse.
FEATURES
-
- Made of high-quality components,
- Possibility of fine temperature regulation,
- Easy positioning of temperature regulation button within the field of vision,
- Indicator lamp can be seen from all the angles,
- Safety junction between the radiator and the device
COLOUR Available colours: White, Black, Chrome.
TECHNICAL SPECIFICATIONS
---------------------------------
MOA THERMOSTATIC ELEMENT
FUNCTIONALITY
The MOA offers 5 temperature settings ranging from 30°C to 60°C. It is equipped with an electronic temperature sensor that guarantees precise temperature control. The MOA displays the currently set temperature level and the status of the heating cycle using an LED indicator. The heating element has a very low power consumption in a standby mode.
DRYER FUNCTION This function allows the setting of a higher heating power for two hours, after which the device returns to the previous state.
INTELLIGENT BUILDING SYSTEMS In the event of a power failure the MOA remembers its previous settings therefore making it suitable for connection to external timers and intelligent building systems.
SAFETY The MOA is equipped with ‘frost’ protection (ANTIFREEZE). It also has a double protection against overheating of the radiator and displays a warning in case of malfunction It has an active safety feature in case of operation in a dry radiator.
DESIGN The MOA is supplied with a straight cable without a plug, it is also available with a cable-masking cover as an optional extra.
COLOUR Available colours: chrome and black.
---------------------------------
KTX 3 TIMER & THERMOSTATIC ELEMENT
FUNCTIONALITY
The KTX 3 offers adjustable temperature levels ranging from 30°C to 60°C in steps of 1°C. An electronic temperature sensor guarantees precise temperature control. The device displays the current set temperature level and indicates the status of the heating cycle or standby state. It also has an easy interface for controller programming. The KTX 3 is designed for use with the TS 1 heating element. The unique feature of the KTX range of heating elements is the Terma‑Split System. The Terma‑Split connector makes it possible to disconnect the TS 1 from the controller head.
DAILY TIMER A 24-hour timer allows you to program up to 4 intervals for heating at a preselected temperature or to switch between heating and power off states.
DRYER FUNCTION A function that allows a controlled temperature and drying time, after which the heater will return back to its previous state.
INTELLIGENT BUILDING SYSTEMS In the event of a power failure, the heating element remembers the previous setting (last setting used), which is useful when the device is controlled by external timers and intelligent building systems.
SAFETY The KTX 3 is equipped with a ‘frost’ protection (ANTIFREEZE). It also has double protection against the heating element overheating. A device error or malfunction is identified by a display of error codes. The KTX 3 also has an additional safety feature that prevents it from working in a dry radiator.
DESIGN Equipped with an easy to read LCD display with a clock, additional power on/off switch and screw connection.
COLOUR Available colours: white, chrome and black.